Asset Twin example

DE - P200

Low Not assessed  Pump on Water treatment / WT-PMP-200

Not in alert.

Likely faults

FaultLikelihoodSeen on
Rotating looseness 70% stream 5f47311d, stream fcaf9d2a
Inner race bearing damage 50% stream 5f47311d, stream fcaf9d2a
Grease issue 50% stream 5f47311d
Flow turbulence 50% stream 5f47311d
Process related harmonics 30% stream 5f47311d, stream fcaf9d2a
Electrical interference 30% stream 5f47311d, stream fcaf9d2a
Beating 20% stream 5f47311d, stream fcaf9d2a

Each axis is analysed on its own; a fault seen on several shows the highest likelihood any of them reports, never a sum.

What changed

Jump in Envelope Peak Score
Typical level of Envelope Peak Score has increased from <<2.54:g^2>> to <<4.26:g^2>>.		 stream fcaf9d2a 2026-10-07 15:15
RMS Increase
An increase in RMS has been detected for mode 2 from <<0.677:g>> to <<0.628:g>>.		 stream 5f47311d 2026-09-29 02:04

Trends

Measurement time 2026-09-26 15:36 to 2026-10-27 13:41 (UTC). ▏went into alert · ▏back to low, cleared or as the evidence faded — from Multiviz's priority history.

Vibration level

How strongly the machine vibrates at this point. A rise here is what usually lies behind an alert: compare it with the alert marks.

Velocity RMS · mm/s Stream 5f47311d 2.54 mm/s Stream 74cebdd6 1.83 mm/s Stream fcaf9d2a 2.82 mm/s
0 1 2 3 4 Oct 01 Oct 08 Oct 15 Oct 22

Reported by the sensor itself, about every 5 min. MultiViz also computes it from each waveform (about every 12.5 h); the sensor's value is shown because it comes more often. The two may differ: each uses its own frequency range.

Impacting

Short, sharp impacts, as from a damaged bearing, raise crest factor and kurtosis — often before the overall level moves.

Acceleration RMS · g Stream 5f47311d 1.12 g Stream 74cebdd6 0.471 g Stream fcaf9d2a 0.689 g
0.0 0.5 1.0 1.5 2.0 Oct 08 Oct 22

Reported by the sensor itself, about every 5 min. MultiViz also computes it from each waveform (about every 12.5 h); the sensor's value is shown because it comes more often. The two may differ: each uses its own frequency range.

Crest factor · peak ÷ RMS, no unit Stream 5f47311d 2.94 Stream 74cebdd6 3.45 Stream fcaf9d2a 2.93
0 2 4 6 Oct 08 Oct 22

Computed by MultiViz from each vibration measurement (waveform), about every 12.5 h.

Kurtosis · no unit; about 3 when nothing is impacting Stream 5f47311d 2.28 Stream 74cebdd6 2.86 Stream fcaf9d2a 2.62
0 1 2 3 4 Oct 08 Oct 22

Computed by MultiViz from each vibration measurement (waveform), about every 12.5 h.

Operating conditions

What the machine was doing. A change in speed or temperature explains many changes in vibration.

Temperature · °C latest 39 °C
0 20 40 60 Oct 08 Oct 22

Reported by the sensor itself, about every 5 min.

Speed

Nothing recorded for this measuring point yet.

Sensor health

About the sensor, not the machine: a flat battery or a weak signal shows up as gaps in the data.

Sensor battery · % latest 100 %
90 95 100 105 110 Oct 08 Oct 22

Reported by the sensor itself, about every 5 min.

Signal strength · unit not reported latest -30
-45 -40 -35 -30 -25 Oct 08 Oct 22

Reported by the sensor itself, about every 5 min.

Record a status

Your verdict, recorded here and sent to Multiviz as a clear of the point: its priority drops to low and rises again only on what is detected after now. It counts once Multiviz has accepted the clear.


Axes

AxisPriorityLatest measurement
Stream 5f47311d Low 2026-10-26 15:34 Analysis and trends →
Stream 74cebdd6 Low 2026-10-26 15:34 Analysis and trends →
Stream fcaf9d2a Low 2026-10-26 15:34 Analysis and trends →

History

Priority

Each time the point's level changed, from Multiviz's priority history (bounded by the deployment). A fall to low says how the alert ended: a clear, or the evidence faded.

Data as ofPriorityWhat happenedBecause of
2026-10-26 15:34 Low — an analysis

Clears

Never cleared.