Asset Twin example

NDE - P200

Low Not assessed  Pump on Water treatment / WT-PMP-200

Not in alert.

Likely faults

FaultLikelihoodSeen on
Rotating looseness 70% stream 1c68d1cf, stream ea365832
Inner race bearing damage 50% stream 1c68d1cf
Electrical interference 30% stream 1c68d1cf
Process related harmonics 30% stream 1c68d1cf, stream ea365832
Beating 20% stream 1c68d1cf

Each axis is analysed on its own; a fault seen on several shows the highest likelihood any of them reports, never a sum.

What changed

Low Frequency
Change in velocity for low frequency band <<12-18:Hz>> for mode 2 has been detected.		 stream 1c68d1cf 2026-09-27 11:15

Trends

Measurement time 2026-09-26 23:46 to 2026-10-27 13:43 (UTC). ▏went into alert · ▏back to low, cleared or as the evidence faded — from Multiviz's priority history.

Vibration level

How strongly the machine vibrates at this point. A rise here is what usually lies behind an alert: compare it with the alert marks.

Velocity RMS · mm/s Stream 1c68d1cf 1.32 mm/s Stream 25715c85 2.24 mm/s Stream ea365832 2.31 mm/s
0 2 4 6 Oct 01 Oct 08 Oct 15 Oct 22

Reported by the sensor itself, about every 5 min. MultiViz also computes it from each waveform (about every 14 h); the sensor's value is shown because it comes more often. The two may differ: each uses its own frequency range.

Impacting

Short, sharp impacts, as from a damaged bearing, raise crest factor and kurtosis — often before the overall level moves.

Acceleration RMS · g Stream 1c68d1cf 0.457 g Stream 25715c85 0.436 g Stream ea365832 0.537 g
0.0 0.5 1.0 1.5 Oct 08 Oct 22

Reported by the sensor itself, about every 5 min. MultiViz also computes it from each waveform (about every 14 h); the sensor's value is shown because it comes more often. The two may differ: each uses its own frequency range.

Crest factor · peak ÷ RMS, no unit Stream 1c68d1cf 3.3 Stream 25715c85 3.59 Stream ea365832 3.59
0 2 4 6 Oct 08 Oct 22

Computed by MultiViz from each vibration measurement (waveform), about every 14 h.

Kurtosis · no unit; about 3 when nothing is impacting Stream 1c68d1cf 2.78 Stream 25715c85 3.05 Stream ea365832 3.1
0 1 2 3 4 Oct 08 Oct 22

Computed by MultiViz from each vibration measurement (waveform), about every 14 h.

Operating conditions

What the machine was doing. A change in speed or temperature explains many changes in vibration.

Temperature · °C latest 30 °C
0 20 40 60 Oct 08 Oct 22

Reported by the sensor itself, about every 5 min.

Speed

Nothing recorded for this measuring point yet.

Sensor health

About the sensor, not the machine: a flat battery or a weak signal shows up as gaps in the data.

Sensor battery · % latest 100 %
90 95 100 105 110 Oct 08 Oct 22

Reported by the sensor itself, about every 5 min.

Signal strength · unit not reported latest -37
-70 -60 -50 -40 -30 Oct 08 Oct 22

Reported by the sensor itself, about every 5 min.

Record a status

Your verdict, recorded here and sent to Multiviz as a clear of the point: its priority drops to low and rises again only on what is detected after now. It counts once Multiviz has accepted the clear.


Axes

AxisPriorityLatest measurement
Stream 1c68d1cf Low 2026-10-26 23:45 Analysis and trends →
Stream 25715c85 Not analysed — Analysis and trends →
Stream ea365832 Low 2026-10-26 23:45 Analysis and trends →

History

Priority

Each time the point's level changed, from Multiviz's priority history (bounded by the deployment). A fall to low says how the alert ended: a clear, or the evidence faded.

Data as ofPriorityWhat happenedBecause of
2026-10-26 23:45 Low — an analysis

Clears

Never cleared.